No-Drill Towel Holder - Bathroom Organizer
منظم عملي مطبوع ثلاثي الأبعاد تُصنع حسب الطلب في القاهرة مع التوصيل داخل مصر.
220 ج.م
الخامة
اللون
اختر لونًا لإضافة هذا المنتج إلى سلة التسوق.
عن هذه القطعة
Minimalist towel holder designed for quick and easy printing.
This model is optimized for:
- Support-free printing
- No assembly required
- Fast print (~3.5 hours)
- Low material usage (~86g PLA)
Mounting:
Designed for adhesive mounting using double-sided tape (tested successfully).
The back features:
- a recessed area for adhesive pads or tape
- a textured surface to improve adhesion
Ideal for clean installation on tiles or smooth surfaces.
Print Notes:
- Print flat on the bed
- No supports required
- Works well with PLA
- PETG recommended for humid environments
Print Settings:
- Printer: Bambu Lab P2S
- Nozzle: 0.4 mm
- Layer Height: 0.24 mm
- Infill: 10% Gyroid
- Walls/Perimeters: 3
- Top Layers: 4 (~1 mm)
- Bottom Layers: 3
- Top/Bottom Pattern: Monotonic
- Supports: No
- Print Orientation: Flat on bed
- Material: PLA (Geeetech Basic)
Note:
Use strong double-sided tape and apply on a clean, dry surface for best results.
Adhesion strength depends on surface and tape quality.
Designed because I couldn’t find a simple and clean solution on MakerWorld.
Simply print and use – no post-processing required.
---
Matching Model
This model is part of a matching set.
Check out the smaler version here:
https://makerworld.com/de/models/2683560-minimal-adhesive-wall-hook-no-drill-towel-holder#profileId-2972377
Both designs share the same style and work perfectly together.
آراء العملاء
تجارب حقيقية لقطع صنعناها ووصلت لأصحابها.
لا توجد تقييمات بعد. إذا وصلتك هذه القطعة، يمكنك أن تكون أول من يشارك تجربته.
